Research by NewsLab and others suggests that television newsrooms have room for improvement when it comes to ensuring the accuracy of what they put on the air. With staff cuts in many newsrooms, fewer people are involved in checking scripts for errors. That makes it more important than ever for anyone involved in producing content to double check it for accuracy.

This ten-point checklist is designed to help. If you have suggestions to add, please let us know.

1. Confirm information that could be in doubt

• Any unattributed information (information that has no name attached to it) is a red flag, demanding further investigation. Even two sources may not constitute confirmation, because one source may have learned the information from the other. Always ask: How do they know what they know, and why are they telling me this?

• Make sure that anyone claiming to be an eyewitness actually was at the scene and in a position to observe what they are telling you. In breaking news situations in particular, people often sound authoritative when they are actually passing along unconfirmed rumors.

• Make sure the soundbites you choose fully capture what each person meant to say. A survey of people who were sources in television news stories found that one person in three said important information was left out of a story and one in five complained that his or her interview was taken out of context.

• If you need to, add information in your narration/track to put comments into context.

• Review your script with an eye to significant information or points of view that have not been included. Look at each soundbite, in particular, and ask: Who would disagree or take a different position?

• Contact people whose views are not reflected in the story and give them a chance to talk. If they decline, make mention of that in your story.

• Make sure your story backs up your lead. Have you over-reached or over-stated the story?

• Restate the focus of your story, and review the script to see if you have stayed on point or strayed from your focus. (A bonus: This is a good way to find places where you can trim the script to save time.)

• Be sure you have attributed information to the correct source in every case.

• Make sure you have checked the spelling of proper names. If possible, check directly with the source. Press releases can be wrong. Even business cards may not show a current title.

• Spelling and grammar count--especially in this age of graphics, closed captioning and Web usage. If you are not positive about a spelling, look it up. This list of commonly misspelled words can help.

• Read scripts out loud to find and fix grammar and usage problems. If in doubt, ask a colleague or check a reference guide.

• Stories with numbers must be checked to make sure the numbers add up. Recalculate percentages, percent change, ratios, and the like, no matter where you got them. Online calculators make this much easier than it sounds.

• Check with an expert not involved in the story if you have any questions about how the numbers were calculated.

• Make sure the information you provide to graphics is correct--especially numbers. Call to confirm all telephone numbers and visit all Web addresses.

• Look at the completed graphic before air to catch mistakes.

• Make a habit of checking the pronunciation of names and places while you are in the field. Ask people to say their names on tape, so you can go back and listen, if necessary. Use this list of commonly mispronounced words to find land mines in your script.

• If you are new to an area, be extra careful with names and places that may look familiar but could be pronounced quite differently from what you expect. Nothing raises more doubts about your credibility than mispronouncing a word your audience thinks you should know.
  

• Be sure that your words and pictures are telling the same story.

• Be sure the narration and soundbites match the finished script, and that mistakes have not crept in during tracking or editing.